The installation of a booster pump in a smart toilet generally does not affect the water inlet of the water heater. A valve can be set. Let me introduce in detail how to install a booster pump in a smart toilet. When installing a booster pump in a smart toilet, it is necessary to ensure that it is installed in a vertical or horizontal manner. The direction of the water flow needs to be consistent with the direction of the arrow displayed on the pump body. The booster pump should be installed as close to the water level as possible.

1. Before installation, we need to conduct a detailed inspection of each of its components to see whether its components are tightly connected, whether there is any looseness, and whether there is any foreign matter blocking the flow channel of the pump body, so as to avoid the situation that it cannot be cleaned during the later installation. During installation, we need to ensure that it is installed in a vertical or horizontal manner. The direction of the water flow needs to be consistent with the direction of the arrow displayed on the pump body. The booster pump should be installed as close to the water level as possible.

2. If conditions permit, it is recommended that you add an extra valve at home to facilitate future maintenance. In addition, we also need to install a pressure gauge outside the pump outlet, so that we can check whether the booster pump is used within the rated head and flow range, which can also effectively extend the service life of the booster pump.

Precautions for booster pump installation

1. During installation, we need to follow the correct installation sequence and relevant installation standards. Its installation must be installed horizontally or vertically according to the "installation method" display. When the pumped liquid level is lower than the upper end face of the impeller of the household booster pump or the shaft of the pump, the household booster pump should be installed with a check valve, and a three-way connection should be connected to the outlet end for water diversion. The pump should be filled with water and the screw plug should be tightened during one use.

2. The connection between the pipelines should be tight and no looseness should occur, especially the water inlet pipeline should not leak, otherwise the pump head will be reduced or water cannot be pumped. Before the household booster pump cavity is not filled with water, please do not rotate it for a long time to avoid damaging the seal. To ensure our safety, it is recommended that you must use a three-core safety socket with a grounding wire.

DC brushless water pump, water heating mattress water pump, foot bath water pump, dishwasher water pump, smart toilet water pump, shower machine water pump, water heater water pump